Eco POG spot and stain treatment.
An industry first...a revolutionary new and non-toxic spot and stain remover for use on solvent soluble spots and stains.
Removes diverse spots and stains such as: Paints, oils, colours, wood dyes, felt-tip pen, lead pencil marks, crayon, asphalt, wax, ball-point ink, tar, shoe polish, resins, glue, glue residues, grease, nail polish, shoe prints, mastic, graffiti and other solvent soluble spots and stains etc.
Description/Characteristics: Eco POG SPOT & STAIN REMOVER is an organic eco friendly plant and vegetable bio-based solvent, which is water rinsable. It is derived from 100% renewable natural resources and is readily and completely biodegradable; with low vapour hazard; low oral toxicity and is non-flammable.
Application/Substrates: Eco POG SPOT & STAIN REMOVER can be used on all colour-fast and solvent resistant surfaces including textiles and carpet fibres, subject to testing for suitability in inconspicuous area first. Note: Eco POG can attack certain painted/coated surfaces and also sensitive plastics, rubbers and vinyl. Always test thoroughly for suitability!
Instructions for use: Ensure the area is free of people, children and pets!
Apply Eco POG SPOT & STAIN REMOVER to the spot or stain by blotting with a terry towel lightly dampened with Eco POG SPOT & STAIN REMOVER. Agitate lightly with the bevelled edge of your spotting brush, or if suitable with the brush itself taking care not to spread the spot or stain. The amount used should always be kept to the minimum to avoid spreading stains, and or causing contamination/delamination of backing materials, which may be sensitive to the use of a solvent.
Following its use for spotting, lightly clean the area with your normal water based cleaning solution and rinse with your extraction equipment. For example M-Power, diluted for cleaning or spotting etc.
Whilst, Eco POG SPOT & STAIN REMOVER is an environmentally friendly and non-toxic cleaning solution, certain individuals may be sensitive to the naturally derived ingredients present in the formulation.
All recommendations are based on practical experience, but where necessary they should be modified to conform to different practice conditions. We cannot claim to serve in any way, but an advisory capacity and undertake no liability for possible damage caused from using Eco POG SPOT & STAIN REMOVER. Tests should be carried out in each individual case before the work is started!
|Safety Sheet Data||
MATERIAL SAFETY DATA SHEET
1.0 PRODUCT NAME: ECO POG
1.1 PRODUCT DESCRIPTION: Solvent Spot and Stain Remover
SUPPLIED BY: Solution (Cornwall) Ltd
Unit 10D Cardrew Industrial Estate,
Cornwall TR15 1SS
Tel: 01209 204343
Fax: 01209 218080
2.0 HAZARD IDENTIFICATION.
Risk of serious damage to eyes. Irritating to respiratory system.
3.0 COMPOSITION/INFORMATION AND INGREDIENTS Hazardous Ingredients: CAS No: %w/w(range): Nature of Hazard:
Ethyl lactate 97-64-3 30-50 Xi: R41, R37, R10
The full text or R phrases is shown in section 16
4.0 FIRST AID MEASURES
Eyes: Irrigate immediately with water for at least 15 minutes. Seek medical advice if irritation persists.
Ingestion: DO NOT INDUCE VOMITING. Rinse mouth with water and give a large glass of water to drink. Obtain immediate medical attention.
Skin:Remove all contaminated clothing. Wash skin with plenty of water. Seek medical attention if irritation persists
Inhalation: Remove to fresh air. Keep at rest. Obtain medical advice.
5.0 FIRE FIGHTING MEASURES
Product is not classified as flammable but will burn in a fire. Keep containers cool with water spray. Extinguish fires with sand, earth, carbon dioxide or dry powder. Do not use water jet. Self contained breathing apparatus recommended.
6.0 ACCIDENTAL RELEASE MEASURES
Contain with sand, earth or inert material and remove to a disposal container. Provide good ventilation during
containment. Disposal should comply with local regulations. Wash area with detergent and water. Small
spillages may be flushed to drain.
7.0 HANDLING AND STORAGE
Avoid ingestion or inhalation of neat material. Product has a low vapour hazard but good ventilation
should be provided in storage/work areas. Keep in original container, tightly closed in cool place. Solvent migration will occur in certain types of plastic container.
PAGE 2 OF 2
MATERIAL SAFETY DATA SHEET
8.0 EXPOSURE CONTROL/PERSONAL PROTECTION
Respiratory: No established Workplace Exposure Limit. Suggest long term limit of 100ppm. Ensure adequate vetilation
Skin/Hands: Overalls are sufficient in conjunction with latex or nitrile rubber gloves.
Eyes: Safety glasses if splashing likely or if spraying.
Avoid working in spray mist
9.0 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear pale amber liquid Odour: Characteristic sweet
Initial boiling point: 144oC Relative Density: 0.95
Flash point: 68oC Solubility in water: Partially miscible/ emulsifiable
Vapour Pressure: <1 mm Hg (20oC) Evaporation rate:0.12 (butyl acetate = 1)
10.0 STABILITY AND REACTIVITY
Thermal decomposition results in carbon dioxide, carbon monoxide and unidentified organic compounds.
Strong oxidising agents, acids and alkalis should be avoided. Auto-ignition is possible with fine spray mists of
any combustible material.
11.0 TOXICOLOGICAL INFORMATION.
May cause drying of skin on prolonged or repeated exposure. Will cause eye irritation.
Low toxicity: LD50 (oral, rat) > 2.0g/kg body weight. LC50(inhalation):>5.4g/kg (rat/4hrs).
Ingestion of product or inhalation of spray mist may cause irritation of mouth and throat.
No identified chronic effects.
No known sensitising effects.
12.0 ECOLOGICAL INFORMATION
Product is not a marine pollutant as defined by IMO. It is readily and completely biodegradable, is not implicated in ozone depletion or global warming and will not bioaccumulate.
13.0 DISPOSAL CONSIDERATIONS
Comply with local regulations for waste disposal. Contaminated earth or inert material may be incinerated at
a permitted site. Rags, paper etc. contaminated with this product should be soaked with water prior to disposal.
If flushed to drain, product may be regarded as trade effluent. Spent product could be suitable for fuel blending.
14.0 TRANSPORT INFORMATION
Not classified as hazardous for transportation purposes.
15.0 REGULATORY INFORMATION
Classified as Xi:Irritant R41, R37 under CHIP REGULATIONS.
R37: Irritating to respiratory system
R41: Risk of serious damage to eyes.
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S39: Wear eye/face protection.
16.0 OTHER INFORMATION
This product is intended for use as an industrial degreaser/cleaning solvent. The responsibility remains with the user to ensure safe conditions of use in the workplace.
The full text of the risk phrases shown in section 2 appears below. These are the classifications of any hazardous raw materials in their concentrated form which contribute to the overall classification of the product.
R10: Flammable R41: Risk of serious damage to eyes R37: Irritating to respiratory system
- AgreedReview by Dean
- WOW!!!Review by Martin