Strip the floor to remove the existing coating, contamination or soil build-up using Xcalibur Heavy Duty Stripper Concentrate diluted accordingly and use as instructed. The floor must be completely free of all contamination and thoroughly dry prior to application. Wooden flooring should be completely sanded back to remove old coatings or contamination from oil based products.
With a flat ?synthetic-lint free? finish mop applicator apply a generous even coat of Xcalibur High Gloss Coating, ensure even application. Lightly overlap to join coats when finishing large areas of flooring, whilst the coating is still wet to ensure a uniform appearance. Allow the first coat to dry thoroughly. Then apply two more coats until the floor has been finished with a maximum of three coats.
Touch dry and re-coat: 1 hour
Suitable for light foot traffic within: 4 hours
Normal foot traffic and normal wear within: 8 hours
Full curing hardness is achieved within: 6-7 days
Maintain the sealed floor by damp mopping or light machine scrub using Xcalibur Neutral Cleaner or Xcalibur Maintainer diluted accordingly. The floor can be burnished once dry and if a high gloss appearance is desired. Periodically deep scrub clean with Xcalibur Maintainer, and once dry apply one to two coats of Xcalibur Restore Finish Coating to restore its appearance.
|Safety Sheet Data||No|