M-Power™ Carpet & Upholstery Cleaner
M-Power uses powerful natural-molecular technology combined with advanced biotechnology techniques. It’s manufactured here in the UK and is an environmentally friendly biologically active cleaning solution for carpets & upholstery, it cleans without compromising performance or safety.
M-Power+ a new formulation
Original M-Power has always been fantastic when used for cleaning carpets & upholstery, with M-Power+ you can clean knowing it also kills enveloped viruses like the current SARS-CoV-2. (SARS-CoV-2 is the virus that causes the illness COVID-19)
Tested and approved to EN14476 with a dilution of 1:50, it’s the most economical virus sanitiser + fabric cleaner available! As well as saving you money being a true all in one product, it’s a great marketing advantage.
So, two products, what’s the difference?
You can still buy the original M-Power above and use it at the great 1:120 dilution rate.
If you want the same cleaning ability but with added benefit of virus protection, choose M-Power+ with a different formulation & 1:50 dilution rate.
How does it clean?
Imagine thousands of tiny hammers attacking the soiling, when you spray down M-Power that’s essentially what’s happening, the tiny invisible micelles are helping break down the soil and virus particles for you.
Visible & improved results will carry on even after extraction, don’t be surprised if your customer comments their furnishings look even better again the next day!
Economical – saves you money!
When used at the recommended 1:120 dilution ratio, original M-Power Carpet and Upholstery Cleaner costs less than 1p per m² cleaned!
Safe & non-toxic – safer for you and your customers
M-Power has been tested to ensure that all compounds that are considered toxic or otherwise hazardous to the operator or the environment are not present.
Manufactured from 100% natural plant based materials, M-Power Carpet and Upholstery Cleaner is derived from renewable/sustainable sources. It’s fully biodegradable and exhibits antibacterial & anti-viral properties thanks to its unique natural-molecular cleaning action.
Directions for use:
Both products can be used on carpets, upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.
Original M-Power
Dilute 8.3 ml per litre with warm water (1:120) – you may find a syringe is useful for measuring.
M-Power+ (EN 14476 approved)
Dilute 20 ml per litre with warm water (1:50)
Carpet & upholstery cleaning:
Spray enough M-Power down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.
In cases of heavy soiling/traffic lanes, additional agitation may be required and/or following the initial spray, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.
Bonnet Cleaning:
Lightly pre-spray carpet & agitate with a Floormac or rotary brush, allow a dwell of 10 minutes.
Moisten the bonnet/absorbent pad with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.
Fogging:
M-Power+ can be used in fogging machines diluted at 1:50.