New
Solution Line Repair Crimp
£14.99 £12.49 +VAT
In stock
- Finance available - spread the cost
- Tried & tested products
- Expert advice & support
Description
Solution Line Repair Crimp
The repair crimp enables swift restoration of a split solution line, providing a new thread ready for a quick connect. Ideal for prompt repairs while working on-site.
- Cut the hose (you may need a hacksaw, or cable cutter)
- Mark the useable hose at 22mm from the end.
- Strip the rubber of the first 6-13mm of the hose.
- Install the sleeve by threading it on counter clockwise until the 22mm line from step 2.
- Install the insert by threading it onto the sleeve clockwise by hand.
- Tighten the insert against the sleeve until the gap is closed. Do not over tighten!.
