STS – Stone Tile & Safety Floor Cleaner
From: £10.99
- UK mainland next working day delivery
- Tried & tested products
- Expert advice & support
Description
STS – Stone, Tile & Safety Floor Cleaner
The most advanced & effective solution for cleaning stone, grout, tile and non slip safety flooring.
A unique and highly effective detergent-free cleaner that removes heavy contamination and soil residues, STS is a highly effective concentrated heavy duty cleaner and maintainer.
Safely removes soiling, oil, grease, fats, smoke, soot, nicotine, cooking deposits, light alkaline lime deposits etc from all porous and semi-porous hard floor surfaces such as stone, tile and safety flooring. Can be used in kitchens, bathrooms, showers etc.
This is achieved by detergent free by splitting the soil binders without the use of enzymes, bacteria, alkaline builders, detergents sodium hydroxide or volatile solvents. STS does not contain any reducing or oxidation agents such as sodium hypochlorite or hydrogen peroxide. No toxic caustic or hazardous acids or butyls.
Safe & effective, easy to use and delivers exceptional results.
Applications:
STS cleans without etching and leaves no sticky residues on surfaces such as Natural Stone, Clay & Quarry Tiles, Flagstones, Grout, Granite, Limestone, Terrazzo, Marble, Slate, Ceramic Tile, Fine Stone Tile, Amtico, Karndean, Brick & as a non slip Safety Floor Cleaner.
Can be used with manual cleaning methods – pressure spraying, damp mopping, brushing or wiping with micro pads, microfibre cloths etc.
It can also be used with all floor maintenance machines such as low-speed rotaries, contra-rotating machines, rotary scrubber-dryers and also steam cleaning equipment.
For exterior cleaning STS can be applied prior to pressure washing to further enhance cleaning results.
It can be used to remove years of build-up caused by pollution on exterior brickwork, stone, statues, monuments etc.
It also offers superior and safe cleaning results when used as a pre-treatment on stainless steel fitted furnishings as found in commercial kitchens, where steam generation cleaning equipment is the preferred method of cleaning. In this instance STS can be applied by hand, or used in the chemical feed tanks of steam cleaning equipment.
Directions for use:
STS is suitable for daily use on all alkaline resistant surfaces subject to testing for suitability for use, prior to cleaning. It should not be used on polished polymer-coated surfaces.
- Maintenance cleaning: dilute 10ml to 20ml per 1 litre of water according to soil conditions.
- Restorative cleaning: dilute 20ml to 100ml per 1 litre of water according to soil conditions.
Additional information
| Weight | N/A |
|---|
Great results on karndean using CRB
Rinsed off and mopped
Customer over the moon
Thanks again I will definitely order more from you soon.👌🥰🥰
My hall/ kitchen and dining room tiles get cleaned every week but I was aware that the grout was pretty disgusting after so many years of neglect/ abuse, so time to go nuclear on them!
I cannot believe the difference this product has made, as soon as I applied it ( 1:10, trust me, it needed this strength) the dirt just lifted off the tiles with help from a grout brush and a fair bit of elbow grease. The only down side was the amount of buckets of water I needed to rinse it off with, but that’s my fault for leaving it too long before taking the plunge.
In fairness I cleaned each area twice because it was more of a restoration clean than standard.
Hope the pics do it justice. The second picture is taken over a step in case you’re wondering.