Description

M-POWER™ – Carpet & Upholstery Cleaner

M-POWER uses powerful natural-molecular technology combined with advanced biotechnology techniques. It’s manufactured here in the UK and is an environmentally friendly biologically active cleaning solution for upholstery & carpet (including wool), it cleans without compromising performance or safety.

What’s the difference between M-Power & M-Power+?

Original M-Power has always been fantastic when used for cleaning carpets & upholstery, with M-POWER+ you can also clean knowing it also kills enveloped viruses like the SARS-CoV-2. (SARS-CoV-2 is the virus that causes the illness COVID-19)

If you want the same cleaning ability but with added benefit of virus protection tested and approved to EN14476, choose M-POWER+ with a different formulation & 1:50 dilution rate.

You can download then print off our free M-Power+ cleaning certificate to give to your customers here.

How does it clean?

Imagine thousands of tiny hammers attacking the soiling, when you spray down M-POWER that’s essentially what’s happening, the tiny invisible micelles are helping break down the soil and virus particles for you.

Visible & improved results will carry on even after extraction, don’t be surprised if your customer comments their furnishings look even better again the next day!

Economical – saves you money!

When used at the recommended 1:120 dilution ratio, original M-POWER Carpet and Upholstery Cleaner costs less than 1p per m² cleaned!

Safe & non-toxic – safer for you and your customers

M-POWER has been tested to ensure that all compounds that are considered toxic or otherwise hazardous to the operator or the environment are not present.

Manufactured from 100% natural plant based materials, M-POWER Carpet and Upholstery Cleaner is derived from renewable/sustainable sources. It’s fully biodegradable and exhibits antibacterial & anti-viral properties thanks to its unique natural-molecular cleaning action.

Both products can be used on carpets (including wool), upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.

Carpet & upholstery cleaning:

Spray enough M-POWER down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.

For heavy soiling additional agitation may be required, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.

Pre-spraying:

Original M-POWER

Dilute 8.3ml per 1 litre with warm water (1:120) – you may find a syringe is useful for measuring.

In-line sprayers:

Original M-POWER

Dilute 66ml per 1 litre of warm water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.

Bonnet Cleaning:

Lightly pre-spray carpet & agitate with a Orbtek or rotary brush, allow a dwell of 10 minutes.
Moisten the bonnet with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.

In tank as a rinse:

M-POWER can also be added to the clean tank of your machine at 8ml per litre. The residual continuing effect of rinsing with M-Power will help to combat unwanted odours & stains after you have left the property.

Both products can be used on carpets (including wool), upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.

Carpet & upholstery cleaning:

Spray enough M-POWER down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.

For heavy soiling additional agitation may be required, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.

Pre-spraying:

M-POWER+

Dilute 20ml per 1 litre with warm water (1:50)

In-line sprayers:

M-POWER+

Dilute 160ml per 1 litre of warm water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.

Bonnet Cleaning:

Lightly pre-spray carpet & agitate with a Orbtek or rotary brush, allow a dwell of 10 minutes.
Moisten the bonnet with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.

In tank as a rinse:

M-POWER+ can also be added to the clean tank of your machine at 20ml per litre. The residual continuing effect of rinsing with M-Power will help to combat unwanted odours & stains after you have left the property.

Fogging:

M-POWER+ can be used in fogging machines diluted at 1:50.

M-POWER+ only:

En14476 Approved

Additional information

Weight	N/A

Reviews (84)

84 reviews for M-Power – Carpet & Upholstery Cleaning Chemical

Maciej S

Rated 5 out of 5

M-Power - Carpet & Upholstery Cleaning Chemical

Mark W

Rated 5 out of 5

M-Power - Carpet & Upholstery Cleaning Chemical

Colin N

Rated 5 out of 5

Simply the best wool carpet cleaner ever. Use it on synthetics as well.

Peter B

Rated 5 out of 5

Excellent service and superb cleaning solutions

Richard H

Rated 5 out of 5

Very good , results

Diane H

Rated 5 out of 5

I love this , the costumer’s love it as it plant based, I only use a small amount and all the carpets /suites come up excellent, . Won’t be using anything else 👌

Keith S

Rated 5 out of 5

Have been using M Power for numerous years now and it never ceases to amaze me. Used yesterday on pub upholstery that was heavily stained and it cleaned up brilliantly

Barry R

Rated 5 out of 5

Does exactly what it says worth buying

Jamie S

Rated 5 out of 5

M-Power - Carpet & Upholstery Cleaning Chemical

Jamie B

Rated 5 out of 5

Excellent product. Does exactly what it says on the tin!

Marek G

Rated 5 out of 5

I have been using M power for years, an excellent and safe product for delicate fabrics and carpets.
every carpet cleaner should have this in their van

Paul H

Rated 5 out of 5

Have been ordering off this company for a while now and no other company makes sure you get your products quicker then these! Keep up the good work!! Paul