S.P.M Lemon Burst – Upholstery & Carpet Cleaning Chemical
From: £7.99
- UK mainland next working day delivery
- Tried & tested products
- Expert advice & support
Description
S.P.M Lemon Burst – Upholstery & Carpet Cleaning Chemical
SPM is a high performance carpet and upholstery cleaning solution that uses a oxygenated detergent free formula to break down heavy soiling.
Soft on Carpets & Sofas. Hard on Stains & Soiling.
SPM saves you money, time and hassle, it’s a fantastic all round cleaning product for any fabric or carpet (including wool).
- NEW – dilution rate has been doubled!
- Spm when diluted costs 6p per litre(inc vat) – at least 3 times cheaper to use than most pre-sprays.
- Powerful stain remover, deodoriser, antimicrobial, all in one!
- Non-resoiling formula – keeps carpets & fabrics cleaner for longer.
- Makes whites and colours look brighter – without the use of damaging optical brighteners.
- Bursting with lemon freshness, an energising scent your customers will love!
SPM does not contain detergent, optical brighteners, enzymes, solvents, or caustic alkalis. SPM can be used as a single product solution for all types of carpet and fabric cleaning operations, subject to pre-testing.
How does SPM work?
SPM contains a unique super wetting agent to aid penetration into fibres and has a built in oxygenating additive which boosts the product.
The cleaning process is achieved by breaking the adhesion between the soil particles and the surface to be cleaned, without the use of enzymes or detergents. It is lightly sprayed directly to the surface to be cleaned, then brushed in well.
The stain removal spectrum is immense and includes grease, drink stains, protein stains, paints, mustard, oil, ketchup, rust and much more.
For best results the product should be brushed in well, ideally with either a pile brush or CRB/rotary machine.
Can be used as a single product solution for all types of carpet (including wool) and fabric cleaning operations, subject to pre-testing.
Directions for use:
Always pre-test SPM in an inconspicuous area for colour fastness & suitability prior to use. Shake or stir well for complete mixing.
Lightly pre-spray onto the carpet or fabric, agitate well using a pile brush or twin contra-rotating brush machine. For upholstery agitation use either a soft brush or microfiber mitt. SPM works on contact, no dwell time is required.
Pre-spraying:
- Mix 2-4 scoops per 5 litres of hot water depending on soiling.
In-line sprayers:
- Mix 4 scoops per 1 litre of hot water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Truckmounts:
- Mix 10 scoops into 20 litres of hot water to make a metering concentrate. Set meter at 2-3 GPH.
Bonnet Cleaning:
- Mix 1-2 scoops into 5 litres of hot water. Pre-spray, moisten bonnet with cleaning solution and clean with an even overlapping motion. When bonnet becomes soiled, rinse and re-wet with cleaning solution.
Post spray or rinse with Crystal Rinse or Final Phase if required.
Not for use in a portable rinse tank.
Additional information
| Weight | N/A |
|---|
I found myself using this as my main product for my jobs .
Fast acting pre spray with great results.
Would recommend it as go to product to have on any van for anyone
But after stumbling across this product I won’t be looking any further for my staple cleaner.
It offers fantastic results with minimal spotting required post clean & leaves a fresh smell.