-
×
The Orbtek - 13" Oscillating Pad Machine
£599.00 (incl. VAT)
Blaze – Performance Solvent Pre-Spray
From: £11.99
- UK mainland next working day delivery
- Tried & tested products
- Expert advice & support
Description
BLAZE – A Performance Solvent Pre-Spray for Upholstery & Carpet Cleaning.
Instant results with little to no agitation or dwell time needed – Blaze is an all round highly effective pre-spray that works on a wide range of heavy soils and stains.
Outstanding performance on dirty carpets & upholstery.
Ultra low residue, it can be used as a pre-spray & rinse.
- Maximum power and economical in use.
- Blaze when diluted costs 3p per litre(inc vat) – at least 4-5 times cheaper to use than most pre-sprays.
- Can be used on all carpets & upholstery with pre-testing.
- Outstanding results on heavily soiled carpets.
- Powerful solvent formula – ideal on oil based stains & soiling.
- Instant results without agitation.
- Can also be used as a rinse in truckmounts or portables due to its ultra low residue.
- Powerful powdered formulation with a pleasant fragrance.
Blaze is an ultra concentrated high performance extraction detergent giving you maximum results whilst being very economical in use, saves you both time & money.
It contains a unique blend of solvents, wetting agents and balanced surfactants to produce a highly effective pre-spray. Acts quickly to emulsify and dissolve the heaviest of soil loading. Fast acting also allows for less dwell time producing outstanding results on heavily soiled carpets.
Can be used on all carpets (including wool), upholstery, outdoor furniture, car seats & more.
Directions for use:
Always pre-test Blaze in an inconspicuous area for colour fastness & suitability prior to use. Shake or stir well for complete mixing.
Apply by sprayer to the carpet or fabric, agitate if required then extract. Do not allow to dry.
Pre-spraying:
- Mix 1-2 scoops per 5 litres of hot water depending on soiling.
In-line sprayers:
- Mix 1½ scoops per 1 litre of hot water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Truckmounts:
- Mix 8 scoops into 20 litres of hot water to make a metering concentrate. Set meter at 2-3 GPH.
In tank as a boost rinse or cleaning solution:
Blaze can also be used in tank to boost your cleaning power or as a powerful cleaning rinse, add it to your rinse tank at:
- ½-1 scoop per 5 litres if you’re also pre-spraying.
- 1-2 scoops per 5 litres as a stand-alone cleaning rinse.
Post spray or rinse with Crystal Rinse or Final Phase if required.
Powder colour: Blue
Additional information
| Weight | N/A |
|---|
The picture was completed black topped. And I thought had no chance if removal. Removed it, fit for commercial carpet on landings.
Fantastic results will definitely be purchasing more.
Thanks
Picture doesn’t show it justice to be fair .