-
×
Protect Stone - Stone & Tile Protector - 5L (Impregnator)
£54.98 (incl. VAT) -
×
Oil Off - Oil Remover - 5L
£44.99 (incl. VAT) -
×
Hydro202 - Encapsulation Carpet Cleaning Chemical - 5L
£38.99 (incl. VAT)
M-Power – Carpet & Upholstery Cleaning Chemical
From: £13.99
- UK mainland next working day delivery
- Tried & tested products
- Expert advice & support
Description
M-POWER™ – Carpet & Upholstery Cleaner
M-POWER uses powerful natural-molecular technology combined with advanced biotechnology techniques. It’s manufactured here in the UK and is an environmentally friendly biologically active cleaning solution for upholstery & carpet (including wool), it cleans without compromising performance or safety.
What’s the difference between M-Power & M-Power+?
Original M-Power has always been fantastic when used for cleaning carpets & upholstery, with M-POWER+ you can also clean knowing it also kills enveloped viruses like the SARS-CoV-2. (SARS-CoV-2 is the virus that causes the illness COVID-19)
If you want the same cleaning ability but with added benefit of virus protection tested and approved to EN14476, choose M-POWER+ with a different formulation & 1:50 dilution rate.
How does it clean?
Imagine thousands of tiny hammers attacking the soiling, when you spray down M-POWER that’s essentially what’s happening, the tiny invisible micelles are helping break down the soil and virus particles for you.
Visible & improved results will carry on even after extraction, don’t be surprised if your customer comments their furnishings look even better again the next day!
Economical – saves you money!
When used at the recommended 1:120 dilution ratio, original M-POWER Carpet and Upholstery Cleaner costs less than 1p per m² cleaned!
Safe & non-toxic – safer for you and your customers
M-POWER has been tested to ensure that all compounds that are considered toxic or otherwise hazardous to the operator or the environment are not present.
Manufactured from 100% natural plant based materials, M-POWER Carpet and Upholstery Cleaner is derived from renewable/sustainable sources. It’s fully biodegradable and exhibits antibacterial & anti-viral properties thanks to its unique natural-molecular cleaning action.
Directions for use:
Both products can be used on carpets (including wool), upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.
Carpet & upholstery cleaning:
Spray enough M-POWER down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.
For heavy soiling additional agitation may be required, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.
Pre-spraying:
Original M-POWER
- Dilute 8.3ml per 1 litre with warm water (1:120) – you may find a syringe is useful for measuring.
In-line sprayers:
Original M-POWER
- Dilute 66ml per 1 litre of warm water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Bonnet Cleaning:
- Lightly pre-spray carpet & agitate with a Orbtek or rotary brush, allow a dwell of 10 minutes.
- Moisten the bonnet with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.
In tank as a rinse:
- M-POWER can also be added to the clean tank of your machine at 8ml per litre. The residual continuing effect of rinsing with M-Power will help to combat unwanted odours & stains after you have left the property.
Both products can be used on carpets (including wool), upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.
Carpet & upholstery cleaning:
Spray enough M-POWER down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.
For heavy soiling additional agitation may be required, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.
Pre-spraying:
M-POWER+
- Dilute 20ml per 1 litre with warm water (1:50)
In-line sprayers:
M-POWER+
- Dilute 160ml per 1 litre of warm water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Bonnet Cleaning:
- Lightly pre-spray carpet & agitate with a Orbtek or rotary brush, allow a dwell of 10 minutes.
- Moisten the bonnet with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.
In tank as a rinse:
- M-POWER+ can also be added to the clean tank of your machine at 20ml per litre. The residual continuing effect of rinsing with M-Power will help to combat unwanted odours & stains after you have left the property.
Fogging:
- M-POWER+ can be used in fogging machines diluted at 1:50.
M-POWER+ only:
Additional information
| Weight | N/A |
|---|
Just follow dilution rate and dwell time I'm not kidding you , amazing results.
And a small amount goes a long long way.
What’s not to like.