-
×
Hydro202 - Encapsulation Carpet Cleaning Chemical - 5L
£38.99 (incl. VAT)
M-Power – Carpet & Upholstery Cleaning Chemical
From: £13.99
- UK mainland next working day delivery
- Tried & tested products
- Expert advice & support
Description
M-POWER™ – Carpet & Upholstery Cleaner
M-POWER uses powerful natural-molecular technology combined with advanced biotechnology techniques. It’s manufactured here in the UK and is an environmentally friendly biologically active cleaning solution for upholstery & carpet (including wool), it cleans without compromising performance or safety.
What’s the difference between M-Power & M-Power+?
Original M-Power has always been fantastic when used for cleaning carpets & upholstery, with M-POWER+ you can also clean knowing it also kills enveloped viruses like the SARS-CoV-2. (SARS-CoV-2 is the virus that causes the illness COVID-19)
If you want the same cleaning ability but with added benefit of virus protection tested and approved to EN14476, choose M-POWER+ with a different formulation & 1:50 dilution rate.
How does it clean?
Imagine thousands of tiny hammers attacking the soiling, when you spray down M-POWER that’s essentially what’s happening, the tiny invisible micelles are helping break down the soil and virus particles for you.
Visible & improved results will carry on even after extraction, don’t be surprised if your customer comments their furnishings look even better again the next day!
Economical – saves you money!
When used at the recommended 1:120 dilution ratio, original M-POWER Carpet and Upholstery Cleaner costs less than 1p per m² cleaned!
Safe & non-toxic – safer for you and your customers
M-POWER has been tested to ensure that all compounds that are considered toxic or otherwise hazardous to the operator or the environment are not present.
Manufactured from 100% natural plant based materials, M-POWER Carpet and Upholstery Cleaner is derived from renewable/sustainable sources. It’s fully biodegradable and exhibits antibacterial & anti-viral properties thanks to its unique natural-molecular cleaning action.
Directions for use:
Both products can be used on carpets (including wool), upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.
Carpet & upholstery cleaning:
Spray enough M-POWER down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.
For heavy soiling additional agitation may be required, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.
Pre-spraying:
Original M-POWER
- Dilute 8.3ml per 1 litre with warm water (1:120) – you may find a syringe is useful for measuring.
In-line sprayers:
Original M-POWER
- Dilute 66ml per 1 litre of warm water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Bonnet Cleaning:
- Lightly pre-spray carpet & agitate with a Orbtek or rotary brush, allow a dwell of 10 minutes.
- Moisten the bonnet with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.
In tank as a rinse:
- M-POWER can also be added to the clean tank of your machine at 8ml per litre. The residual continuing effect of rinsing with M-Power will help to combat unwanted odours & stains after you have left the property.
Both products can be used on carpets (including wool), upholstery and hard surfaces. Always pre-test the carpet, fabric or surface before cleaning.
Carpet & upholstery cleaning:
Spray enough M-POWER down to thoroughly dampen all fibres. Allow a 10 minute dwell period, during which agitation may be used to increase the soil fragmentation.
For heavy soiling additional agitation may be required, over-spray the heavily soiled area a second time using approximately 25% of the original amount sprayed. Extract.
Pre-spraying:
M-POWER+
- Dilute 20ml per 1 litre with warm water (1:50)
In-line sprayers:
M-POWER+
- Dilute 160ml per 1 litre of warm water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Bonnet Cleaning:
- Lightly pre-spray carpet & agitate with a Orbtek or rotary brush, allow a dwell of 10 minutes.
- Moisten the bonnet with M-power and clean with an even overlapping motion. When the bonnet becomes soiled, rinse and re-wet with M-power.
In tank as a rinse:
- M-POWER+ can also be added to the clean tank of your machine at 20ml per litre. The residual continuing effect of rinsing with M-Power will help to combat unwanted odours & stains after you have left the property.
Fogging:
- M-POWER+ can be used in fogging machines diluted at 1:50.
M-POWER+ only:
Additional information
| Weight | N/A |
|---|
I find the longer the dwell and agitation the better it works . Leaves wool fibres lush and soft
This new version which has anti viral properties is even better offering clients peace of mind that their carpets are clean and fully sanitised.
Awesome product!