-
×
World of Clean Sample Pack
£55.99 (incl. VAT)
Spark – 2in1 Performance Pre-Spray & Booster
From: £11.99
- UK mainland next working day delivery
- Tried & tested products
- Expert advice & support
Description
SPARK – 2in1 Upholstery & Carpet Pre-Spray & Booster
Ever wished your pre-spray was stronger and worked faster? Spark can be used by itself as a performance pre-spray or as a powerful booster when mixed with other pre-sprays on multiple surfaces.
Adding a little Spark to your pre-sprays will supercharge your cleaning, making them more effective. It’s a unique heavy hitter with serious cleaning power, save money today with two products in one!
As a stand-alone performance pre-spray:
- Maximum power and economical in use.
- High alkaline detergent pre-spray.
- Powerful grease-breaking formula.
- Outstanding results on heavily soiled carpets – works on all types of soiling on multiple surfaces.
- Spark when diluted costs 3p per litre(inc vat) – at least 4-5 times cheaper to use than most pre-sprays.
- Pleasant light fragrance.
As a booster:
- Accelerates any alkaline or neutral cleaning chemical – making them work much harder.
- Boosts cleaning power making cleaning cheaper, easier & faster.
- Safe on carpets & upholstery (subject to pre testing)
- Improves performance of floor strippers and hard surface cleaners.
Get serious with your cleaning, add some spark and ignite to your cleaning today!
Directions for use:
Always pre-test Spark in an inconspicuous area for colour fastness & suitability prior to use. Shake or stir well for complete mixing.
Apply by sprayer to the carpet or fabric and allow some dwell time – agitation can be applied during this contact period if required.
Pre-spraying:
- Mix 1-2 scoops per 5 litres of hot water depending on soiling.
- Use as a standalone pre-spray or mix with other chemicals as a booster. Not for use in tank.
In-line sprayers:
- Mix 1½ scoops per 1 litre of hot water (1:8 dilution). Adjust the sprayer to 1:4 for heavily soiled areas.
Truckmounts:
- Mix 8 scoops into 20 litres of hot water to make a metering concentrate. Set meter at 2-3 GPH.
Post spray or rinse with Crystal Rinse or Final Phase if required.
Additional information
| Weight | N/A |
|---|
seems to be a finer powder than SPM and mixed a lot easier.